01
One wall per room, at most
A texture finish works because it contrasts with flat walls around it. Two textured walls in one room cancel each other out and the room reads busy rather than considered.
3–6 daysTypical job
Texture, metallic, lime and concrete finishes — applied by hand, on a sample panel you approve first.
Texture and metallic feature wall painting in Bengaluru costs ₹120 to ₹450 per square foot. A typical 10×9 foot feature wall runs ₹11,000–₹40,000 depending on the finish. It is priced per square foot of feature wall, not per room, because it is hand-applied specialist work.
The mistakes are predictable, and all of them are about restraint.
A texture finish works because it contrasts with flat walls around it. Two textured walls in one room cancel each other out and the room reads busy rather than considered.
Texture is only visible when light crosses it at an angle. On a wall lit flat-on it disappears and you have paid for nothing. We pick the wall based on your window and lighting positions.
Metallic and lime finishes look completely different at 2 square feet than at 90. We produce a 2×2 foot panel in your own room light and get it signed off before touching the wall.
Metallic finishes in particular magnify every undulation. Full putty, sanded flat, is not optional here — this is where most of the preparation time goes.
Every failure we get called to fix started with one of these being skipped.
Wall putty fills the pinholes that make a finished wall look patchy under evening light. One coat rushed is the most common corner cut.
Using a cheap primer under a premium emulsion voids the paint warranty and costs you a third coat. We use the same manufacturer's system throughout.
Over-thinning stretches a bucket further and thins your coverage. Our teams dilute by measure, not by eye.
Full sheeting, taped edges, and a cleaned site at the end of each day. You are living in the house while we work.
Sample first, wall second. Never the other way round.
We test the existing wall for damp, chalking and loose putty. Painting over a damp wall is the single most common reason a repaint fails within a year.
Scraping, crack filling, two coats of putty and sanding. This is 60% of the labour and all of the difference between a good and a bad paint job.
A full primer coat, tinted towards the topcoat. Skipping primer to save a day is why some walls need three topcoats instead of two.
Applied with the manufacturer-specified dilution and drying interval between coats. We leave the site cleaned and the furniture back in place.
Per square foot of feature wall. A typical wall is 80–100 sq ft.
Roller and comb textures, single-tone. Durable and understated.
Metallic, pearl and travertine effects. Two-tone, hand-applied, sample approved.
Lime plaster, Venetian and concrete finishes applied in multiple layers and burnished.
| What you get | Essential | Premium | Luxe |
|---|---|---|---|
| Starting price | ₹120/sq ft | ₹240/sq ft | ₹450/sq ft |
| Single-tone texture | Yes | — | — |
| Full putty preparation | Yes | — | — |
| Sample panel | Yes | — | — |
| Sealer coat | Yes | — | — |
| Metallic or pearl finish | — | Yes | — |
| Two-tone hand application | — | Yes | — |
| Sample panel approved | — | Yes | — |
| Protective glaze | — | Yes | — |
| Lime or Venetian plaster | — | — | Yes |
| Multi-layer application | — | — | Yes |
| Burnished finish | — | — | Yes |
| Wax or sealer | — | — | Yes |
Priced per square foot of the feature wall only. Surrounding walls are quoted as standard emulsion.
A typical 10×9 foot wall runs ₹11,000 to ₹40,000 depending on finish. Roller textures sit at the lower end, hand-applied lime and Venetian plaster at the top.
The one that light crosses at an angle — usually the wall perpendicular to your main window. Texture on a flat-lit wall is invisible, and that is the most common way people waste this money.
You can, but we would advise against it in the same room. The effect depends on contrast with plain walls. Two textures in one room read as busy rather than deliberate.
Always. We apply a 2×2 foot panel on your actual wall, in your actual light, and we do not proceed until you have approved it. Metallic finishes especially look nothing like the catalogue at full scale.
Longer than flat paint — 8–10 years typically, because the surface hides marks rather than showing them. The trade-off is that they are harder to repair invisibly if damaged, since they are hand-applied.
We work across Bengaluru, and we quote after seeing the site — not over the phone.
Include the window. Which wall gets raking light decides everything.
Written on-time guarantee · 10-year warranty
Free consultation + 3D design of your own floor plan. Fill in to unlock the offer.
No spam. Your number stays private. By continuing you agree to our Terms & Privacy Policy.