Skip to content
Free Calculator

7–20 daysPer point

The work that has to be right before anything is covered up.

Wires and pipes disappear behind walls for the next twenty years. This is the stage where shortcuts are permanent.

The short answer

What plumbing and electrical rework costs in Bengaluru.

Electrical points in Bengaluru cost ₹450 to ₹900 per point including conduit, wiring and switch. Plumbing points run ₹900 to ₹1,400 per point. A full 2 BHK rewire typically lands between ₹65,000 and ₹1.4 lakh depending on point count and wire grade.

What matters here

Where old flats catch people out.

A ten-year-old Bengaluru flat was wired for a different set of appliances than you own.

01

The load has changed

Builder wiring assumed one AC and no induction hob. Add two ACs, a geyser, a dishwasher and an oven and the original 4mm mains is undersized. We calculate actual load before deciding what can be reused.

02

Point positions follow the furniture

Sockets get planned after the furniture layout is fixed, not before. A socket behind a wardrobe is a socket you have paid for and lost.

03

Concealed conduit, always

Casing-capping surface conduit is cheaper and looks it. Concealed PVC conduit chased into the wall means a future rewire is possible without breaking the wall again.

04

Test before you close the wall

Every circuit gets an insulation and continuity test before plastering. Finding a nicked cable after the wall is painted means opening it back up.

How we do it

The parts that decide whether it lasts.

Every failure we get called to fix started with one of these being skipped.

Cove fillet at every junction

Water gets in at the 90-degree wall-to-floor corner. Rounding it into a fillet before the membrane goes on is the step most often skipped.

Reinforcing mesh at stress points

Corners, pipe penetrations and drain outlets get fibreglass mesh embedded in the first coat. These are where every failure we are called to fix started.

Two cross-applied coats

Second coat at 90 degrees to the first, so a thin patch in one is covered by the other. Single-coat application is not waterproofing.

48-hour ponding test before tiling

We flood it and watch it. Testing after the tiles are down means breaking a finished floor to find the leak.

Step by step

Sequenced so nothing gets buried untested.

Everything is tested before it disappears behind plaster.

Survey and scope

A site visit that records what is actually there — not what the plan says. Old buildings hide surprises and we would rather find them before quoting.

Sequenced plan

Civil, plumbing, electrical, waterproofing, then finishes. Renovation goes wrong when trades overlap in the wrong order.

Execution

One project manager, one WhatsApp group, daily photographs. You always know what happened on site that day.

Handover

Snag list closed in writing, debris removed, and every warranty document handed over together.

Pricing

What it costs, per point.

Including conduit, wiring, accessories and testing.

EssentialStandard
From
₹450/point

Standard electrical point: concealed conduit, FR wire, modular switch.

  • Concealed PVC conduit
  • FR-grade copper wire
  • Modular switch and plate
  • Circuit testing
Get a quote
PremiumMost chosen
From
₹700/point

Premium point with FRLS wire, branded modular plate, dedicated circuits for high-load appliances.

  • FRLS low-smoke wire
  • Branded modular accessories
  • Dedicated appliance circuits
  • Upgraded MCB board
Get a quote
LuxeBespoke
From
₹1,400/point

Plumbing point or specialist circuit: CPVC/UPVC line, concealed valves, pressure tested.

  • CPVC hot and cold lines
  • Concealed valves
  • Pressure test at 6 bar
  • Full documentation
Get a quote
What each package includes
What you getEssentialPremiumLuxe
Starting price₹450/point₹700/point₹1,400/point
Concealed PVC conduitYes
FR-grade copper wireYes
Modular switch and plateYes
Circuit testingYes
FRLS low-smoke wireYes
Branded modular accessoriesYes
Dedicated appliance circuitsYes
Upgraded MCB boardYes
CPVC hot and cold linesYes
Concealed valvesYes
Pressure test at 6 barYes
Full documentationYes

A full 2 BHK rewire typically runs ₹65,000–₹1.4 lakh. We quote by point count after a site survey, never over the phone.

Keep exploring

Often planned together.

Light

False ceiling and lighting

Where most new electrical points end up terminating.

See ceilings
Protect

Wet wall backs

Waterproofing behind every wall a pipe runs through.

See wet walls
Service

Home renovation

The full renovation service this sits inside.

See renovation
Good questions

Questions worth asking first.

It depends on the mains and the board. If the incoming cable and MCB board can carry your actual load, adding points is fine. If you are adding a second AC, an oven or an induction hob to builder wiring, the mains usually needs upgrading first.

Typically 55–75 points including lights, fans, sockets and appliance circuits. Builder flats often come with 35–45, which is why so many homes end up on extension boards.

FR as a minimum, FRLS if you can stretch to it. FRLS produces far less toxic smoke in a fire, which matters in a flat where the exit is a single corridor. The cost difference across a 2 BHK is roughly ₹8,000.

Within a bathroom, usually yes, for a couple of feet. Moving a WC significantly, or moving a bathroom to a new location, means changing the drain stack — which needs association approval and is often refused. We flag this early rather than after you have paid.

Our electrical work is carried out by licensed electricians and every circuit is insulation-tested before the wall is closed. You get the test record and the wiring layout at handover, which matters when you next need to drill a wall.

Across Bengaluru

Working in your neighbourhood.

We work across Bengaluru, and we quote after seeing the site — not over the phone.

Say hello

Tell us what trips.

If a breaker goes when the geyser and the AC run together, that tells us more than a floor plan does.

+91 63612 58401Mon–Sun, 9am – 9pm
contact@interiorsbyarchree.comWe reply within a working day
HBR Layout, BengaluruStudio · 10am – 8pm